Blast cleaning with CHROMA ABRASSIVES means significantly lower dust emissions because of the incoherent Toughness of the material and rapid settling due to its high specific gravity. This ensures minimum disruption and Danger to adjoining rations and improved operator visibility and safety.

CHROMA ABRASSIVES are very fast cutting due to the large number, speed and shape of grains impacting on the Surface. The acceleration and speed of a grain in an airstreams is a function of the inertia and hence the size of the grain. Smaller grains accelerate much more readily, thus imparting higher impact energy to the surfaces resulting in a superior Cleaning rate – usually twice the m2/hr of conventional abrasives.

CHROMA’s unique grain size ensures that there are many more active grains impacting on the surface resulting in greatly reduced abrasive consumption – usually one third that of conventional sands and slags.

CHROMA ABRASSIVES grains clean deep into the cavities and pitted areas down to the bare metal, thoroughly removal all rust, soluble salts and other contaminations. The blasted surface area is free of embedment and free of rouge peaks and through. SA3 White is effortlessly achieved. A surface profile of 50 – 75 microns is easily achieved along with a much Greater number of peaks per unit area.

CHROMA ABRASSIVES are non-toxic .There is no silicosis hazard, leachable heavy metals or radio active Contaminants. Lower consumption and recyleability result greatly reduced disposal volumes of non-toxic product.

CHROMA ABRASSIVES are suitable for multiple usage. It can be recycled in 5 minute or more without losing its Superior cutting ability. Special GMA GARNET recycling systems are available upon request. All of which adds up to natural, clean and cost effective blasting.